How to Measure the Shaft on a Trolling Motor?

How to Measure the Shaft on a Trolling Motor?Are you looking to measure the shaft length on your trolling motor? Getting the correct shaft length is crucial for optimal performance and avoiding underwater hazards. In this article, we will guide you on how to measure the shaft length accurately and determine the correct size for your motor.

Before we dive into the details, let’s quickly go over the SEO relevant keywords: measure trolling motor shaft, measuring trolling motor shaft length, and determine correct shaft length.

Now, let’s get into the specifics of measuring the shaft length. The shaft length is measured from the base of the motor head down to the top of the motor compartment. For transom mount motors, you will need to measure the distance from the mounting spot on the transom to the waterline. Add 20 inches to this measurement to get the desired shaft length. If you frequently navigate rough water, it is recommended to add an additional 5 inches to ensure better performance.

Why is Choosing the Correct Shaft Length Important?

Choosing the correct shaft length is of utmost importance when it comes to the performance and safety of your trolling motor. The shaft length determines how deep the propeller sits in the water, directly impacting the motor’s ability to generate optimal thrust. If the shaft is too short, the propeller may not be fully submerged, resulting in reduced efficiency and power. On the other hand, opting for a shaft that is too long may lead to contact with underwater hazards, such as rocks, weeds, and logs, which can damage your motor and hinder its performance.

By selecting the correct shaft length, you not only ensure that the propeller remains beneath the waterline but also enhance the overall maneuverability and control of your trolling motor. Longer shaft lengths create more drag, which can decrease your motor’s performance and drain your battery faster. Additionally, excessive shaft length can lead to noisy cavitation bubbles that can startle fish and negatively impact your fishing experience. Therefore, it is crucial to find the right balance and choose a shaft length that provides optimal thrust without compromising on safety and performance.

One way to determine the correct shaft length is by considering the type of water conditions you frequently encounter. If you often navigate through rough waters or face choppy conditions, it is advisable to add a few extra inches to the recommended shaft length. This additional length will allow your motor to stay submerged even when facing waves and swells, ensuring consistent and reliable performance. It’s always better to err on the side of caution and choose a longer shaft length if you are unsure between two options.

How to Measure the Shaft Length on Transom Mount Motors

To ensure the correct shaft length for transom mount motors, follow these simple steps:

Step 1: Measure from the Mounting Spot to the Waterline

Using a tape measure, measure the distance from the mounting spot on the transom to the waterline. This measurement will help determine the base length of the shaft.

Step 2: Adding the Recommended Inches

Once you have measured the distance, add 20 inches to the measurement. This will give you the desired shaft length for your transom mount motor. It’s important to note that if you frequently navigate through rough water, it is recommended to add an additional 5 inches to the total shaft length.

By following these steps, you can ensure that your transom mount motor has the correct shaft length to provide optimal performance and avoid any potential underwater hazards.

Table: Recommended Shaft Length for Transom Mount Motors

Transom Mount Motor Type Distance from Mounting Spot to Waterline Recommended Shaft Length
Standard Transom Mount Measurement in inches Measurement + 20 inches
Rough Water Application Measurement in inches Measurement + 25 inches

Refer to the table above to determine the recommended shaft length based on the measurement of the distance from the mounting spot to the waterline. If you are unsure between two sizes, it is always better to choose the longer one to ensure optimal performance. Remember, choosing the correct shaft length for your transom mount motor is crucial for a smooth and efficient boating experience.

How to Measure the Shaft Length on Bow Mount Motors

When it comes to measuring the shaft length on bow mount motors, it’s crucial to get an accurate measurement to ensure optimal performance. The correct shaft length is essential for keeping the propeller submerged and avoiding contact with underwater hazards. Here are the steps to determine the correct shaft length for bow mount motors:

Step 1: Measure from the Bow to the Waterline

Start by measuring the distance from the mounting surface on the bow to the waterline. This measurement will serve as the base for determining the minimum required shaft length. Use a tape measure or ruler to get an accurate reading.

Step 2: Add the Recommended Length

Once you have the measurement from the bow to the waterline, it’s time to add the recommended length to determine the minimum required shaft length. It is generally recommended to add at least 22 inches to this measurement. However, if you frequently fish in rough waters or offshore, you may want to add 25-27 inches to provide extra clearance in case of swell or chop.

By following these steps, you can ensure that your bow mount motor has the correct shaft length for optimal performance. Remember that choosing a shaft length that keeps the propeller submerged will provide optimal thrust and reduce the risk of damage. Take into consideration your specific boating conditions and fishing habits to determine if additional length is necessary.

Table: Recommended Shaft Length for Bow Mount Motors

Fishing Conditions Bow to Waterline Measurement Recommended Shaft Length
Normal Fishing Conditions Measurement from bow to waterline Minimum required measurement + 22 inches
Frequent Rough Waters or Offshore Fishing Measurement from bow to waterline Minimum required measurement + 25-27 inches

It’s important to note that these recommendations are general guidelines. Your specific boating conditions and preferences may require different shaft lengths. It’s always a good idea to consult the manufacturer’s guidelines and consider seeking professional advice if you’re unsure.

Remember, the correct shaft length is essential for optimal performance and avoiding contact with underwater hazards. Take the time to measure accurately and choose the appropriate shaft length for your bow mount motor to enjoy a smooth and successful boating experience.

Important Considerations When Measuring Shaft Length

When measuring the shaft length on a trolling motor, there are several additional considerations to keep in mind. These factors can impact the performance and overall effectiveness of your motor, so it’s essential to take them into account. Here are some important things to consider:

Weight Impact

One crucial consideration is the additional weight that will be placed directly over the bow. This can include items such as a full tank of fuel and gear. The weight distribution on the bow affects its rise and can impact how the boat handles. Therefore, it is vital to account for this added weight when measuring the shaft length. Failure to do so may result in inadequate performance and inefficient operation of the trolling motor.

The Submersion Rule

The submersion rule is an important guideline to ensure that your trolling motor operates optimally. According to this rule, the top of the motor should be submerged at least 12 inches under the waterline. This ensures sufficient depth for the propeller to generate adequate power and thrust. It also helps prevent noisy cavitation, which can spook fish and disrupt your fishing experience. When measuring the shaft length, it is crucial to ensure that the submersion rule is met to maintain optimal performance.

Choosing the Longer Length

If you find yourself uncertain between two possible shaft lengths, it is generally recommended to choose the longer option. Selecting a slightly longer shaft ensures that the propeller remains sufficiently submerged, even in rough waters or challenging conditions. This extra length can provide a safety buffer and prevent potential issues such as the propeller breaking the water’s surface during operation.

Trolling Motor Shaft Length Considerations
Consideration Description
Weight Impact Take into account the additional weight over the bow, such as a full fuel tank and gear, to determine the ideal shaft length.
The Submersion Rule Ensure that the top of the motor is submerged at least 12 inches underwater to maintain optimal performance and prevent cavitation.
Choosing the Longer Length If unsure between two options, opt for the longer shaft length to provide a safety buffer and avoid potential issues in challenging conditions.

By considering these additional factors when measuring the shaft length on your trolling motor, you can ensure that your motor performs optimally, stays submerged at the correct depth, and avoids any potential problems or hazards. Taking the time to measure accurately and account for these considerations will enhance your boating experience and allow you to make the most out of your trolling motor.

Conclusion

Measuring the shaft length on a trolling motor is of utmost importance for achieving optimal performance and avoiding underwater hazards. By accurately measuring the distance from the mounting spot to the waterline and adding the recommended inches, boaters can ensure they have the correct shaft length.

Choosing the right shaft length is crucial for maintaining optimal thrust and preventing contact with rocks, weeds, logs, and other potential hazards lurking beneath the water surface. It also helps reduce drag and noise caused by cavitation bubbles, creating a more peaceful and productive fishing experience.

By following the guidelines provided in this article and considering factors such as additional weight and the submersion rule, boaters can enhance their boating experience and make the most out of their trolling motors. So, don’t overlook the significance of measuring shaft length – it can truly make a difference in your overall boating performance and safety.

Richard Dodds
Latest posts by Richard Dodds (see all)

Leave a Comment